WELCOME, NEO PILOT!
Join our DJI NEO Community today!
Sign up

Carry case for Neo

Droning on and on...

Well-Known Member
Joined
Sep 1, 2024
Messages
332
Reaction score
376
Age
62
Skyreat has a thread for their new cases, and they look good!

However, in my opinion, FPVTosky did the drone-only case a little better (link):

715+7MWLrVL._AC_UY1000_.jpg


61EeUJ1Lg9L._AC_UY1000_.jpg


It's a little smaller, just the size of the drone like the years ago case for a folded Mavic Air. Like the Skyreat case, you can pack two extra batteries, but in the mesh pocket. Also comes in black, gray, and orange!

Ordered one, I'll get it before the Neo 🤣🤣
 
Last edited by a moderator:
Many of these cases have Sunnylife branded on them but are sold under different names (retailers?).

I have these cases for my Mini 3 Pro, Mavic 3 Pro and the controllers. I use them all the time to reconfigure my setup as needed - shoulder bag or backpack. I also have a Pelican hard case but rarely use it.

Chris
 
  • Like
Reactions: RcHawks
I'm ordering a hard case for the complete kit.
 
  • Like
Reactions: sarahb and Chrislaf
I don´t worry about buying more things to Neo. Very lucky, found an old, small shoulderbag fits the whole combo in it and still small size (battery hub to the bottom, drone and radio on it).
Also has a hook on the back side to wear on belt. IMG_20241002_130145.jpg

IMG_20241002_130158.jpgIMG_20241002_130250.jpgIMG_20241002_130348.jpg
 
Last edited by a moderator:
I ordered the Skyreat hard case that will carry the drone, batteries and controller. Like many, I'll get the case before I actually get the drone. I'll post a review here when it arrives and after the drone arrives as well.
 
Here's what I picked up for "skippy" the stunt drone. Haven't received it yet
. Screenshot 2024-11-20 at 6.12.55 AM.png
 
Last edited by a moderator:
I'm ordering a hard case for the complete kit.

Let us know what you end up with. I like to keep all the bits in the same case/bag so I don't lose them. I was hoping someone would come out with one that can accomodate the N3 goggles and the charger and everything else.
 
  • Like
Reactions: RcHawks and NEO 317
I have the case that is featured in post #1 and love it. It is small and compact. I already had a case for the RC-N3 controller.

I have modular cases for all my drones because I am constantly re-configuring my set-up depending on what I am doing. I put them in either a regular backpack or photo backpack.

Chris
 
  • Like
Reactions: Erk1024
I'm using my old DJI MA2 soft case for now.

It holds the NEO, RC-N3 remote, and batteries.

I'll shop for a proper case when DJI has the N3 goggles in stock and the MC3 remote.
 
Let us know what you end up with. I like to keep all the bits in the same case/bag so I don't lose them. I was hoping someone would come out with one that can accomodate the N3 goggles and the charger and everything else.
IMG_1775.JPGIMG_1773.JPGIMG_1776.JPGIMG_1774.JPG

Check out this great hard case by @Skyreat
 
Using the Avata2 case as the field bag for both the Neo and Avata2. Picked up an inexpensive "hard" case designed for the Avata2 Fly More Kit. It serves mostly as a storage case. I like the soft cases for heading out to wherever I plan to fly. Would not purchase the Avata2 case if I didn't already have one . Came with the FlyMore kit. Too expensive for what you get. But it does work out nice for my Neo kit. Neo, batteries in hub, Goggles3, FPV RC3, spare propellers, and still enough room if I wanted to pack the MC3 and another 3 batteries in a charging hub. Nice an compact like the Neo. One thing to consider are the RC3 sticks. I leave them on. You then need gimbal stick protectors. Inexpensive aftermarket options or diy.

For the non-DJI hardware I have just used the hardware hard cases that have the pluck foam insides and pluck to fit. Inexpensive and flexible option. Right now might be the only option if you use the N3. Maybe a box goggle case would work for the N3?
 
  • Like
Reactions: RcHawks
So I picked up 2, one of the Skyreats and a “PEKCREWS’ sling bag that has a cutout for my n3 goggles, which haven’t shipped yet. The Skyreat works fine.
IMG_0383.jpegIMG_0387.jpeg
 
  • Like
Reactions: RcHawks
So I picked up 2, one of the Skyreats and a “PEKCREWS’ sling bag that has a cutout for my n3 goggles, which haven’t shipped yet. The Skyreat.

I hope the goggles fit in the cutout. Let us know when you try it out.
 
  • Like
Reactions: RcHawks

New Posts

Members online

Forum statistics

Threads
290
Messages
3,144
Members
217
Latest member
NealW