On slight windy days as the NEO tries to compensate and adjust to maintain a level lift / flight path), I noticed in ROCKET MODE (camera / gimbal tilted a full 90-degrees downward), that the video image will capture an "edge shadow frame" (aka - vignette effect) from the rear portion of the gimbal bumper guard (accessory attachment). Obviously I can remove the bumper guard and the problem is solved. I was wondering if anybody experienced the same situation or can suggest a "better" (interference free) Gimbal Frame Guard ? I gather the thickness of the Gimbal Frame and location above the existing attachment screws (frame) is enough protrusion for the camera to capture as the NEO wobbles up and down ?
ROCKET MODE vs. Gimbal Guard (Frame) > Vignette Effect ?
- Thread starter NEO_GMAN
- Start date
okayest.fpv
Member
- Joined
- Aug 2, 2025
- Messages
- 19
- Reaction score
- 31
I've seen ads for that thin metal one that is supposedly superlight and doesn't get beat around by the wind also looks like it would be out of frame - have not tried that one myself, but as someone who does not like adding any weight, or anything the wind will have fun with, that one is probably your best bet.
Update ~ I took the NEO on a holiday vacation (Mexico ~ Elevation 8K ft). Wind conditions were 3-6 MPH. The “Plastic” design (snap on) worked well without edge guard interference (Vignette) in Rocket Mide . My only gripe with the “Plastic” version is the clearance (direct line of site) between the upper frame guards (against) near the forward Function Button. I can’t have it all ….
